BNSV Water hammer elimination tank
Overview
Water hammer elimination tank is an effective active water hammer protection equipment. It prevents the negative pressure by adding water to the pipeline, and solves the water hammer of pump stop and cut-off from the source. When the positive pressure returns from the downstream of the pipeline, the gas in the tank is compressed, so as to stabilize the peak value of positive pressure. It can completely replace the traditional two-way pressure regulating tower. The water hammer elimination tank is affectionately called the "water hammer guard".
● The medium is stored in the rubber liner and does not contact with the tank body, so the tank body will not rust;
● The rubber that meets the requirements of drinking water shall be selected for the inner tank, which will not pollute the medium;
● The gas is stored between the tank and the tank, which will not leak, and does not need frequent inflation. Therefore, it does not need to be equipped with an air compressor and is easy to use;
● It is safe and reliable and can effectively protect pipelines. When the pipeline produces negative pressure, the pressure is added to the pipeline to prevent the negative pressure; when the water hammer occurs, the rubber liner absorbs the water in the pipeline to avoid water hammer;
● It has simple structure, high reliability and no need of routine maintenance. The ingenious starting structure simplifies the control mode without external electric control equipment;
● It can replace the surge tank to save construction cost and land occupation cost;
● The detection method is simple and low-cost, and the sealing of the tank can be detected only with soapy water;
l Long service life. Rubber tank can be used for a long life.
Without water hammer elimination tank After installing the water hammer elimination tank
The water hammer elimination tank is mainly composed of steel tank body and imported elastic rubber liner. Other auxiliary accessories include inflatable joint, safety valve, anti-seismic pressure gauge, pressure transmitter, liquid level gauge, water leakage sensor and anti extrusion grille.
